laptop monitor repair computer monitor troubleshooting proxima repair lcd screen repair replacing lcd screen lcd maintenance
Small monochrome displays such as those found in personal organizers, or older laptop screens have a passive-matrix structure employing supertwist nematic (STN) or double-layer STN (DSTN) technology (DSTN corrects a color-shifting problem with STN). Each row or column of the display has a single electrical circuit. The pixels are addressed one at a time by row and column addresses. This type of display is called a passive matrix because the pixel must retain its state between refreshes without the benefit of a steady electrical charge. As the number of pixels (and, correspondingly, columns and rows) increases, this type of display becomes increasingly less feasible. Very slow response times and poor contrast are typical of passive-matrix LCDs. In 1969, the twisted nematic field effect in liquid crystals was discovered by James Fergason at Kent State University in the USA, and in 1971 his company ILIXCO (now LXD Incorporated) produced the first LCDs based on it, which soon superseded the poor-quality DSM types. When an electrical charge is applied to the electrodes, the molecules of the liquid crystal align themselves parallel to the electric field, thus limiting the rotation of entering light. If the liquid crystals are completely untwisted, light passing through them will be polarized perpendicular to the second filter, and thus be completely blocked. The pixel will appear unlit. By controlling the twist of the liquid crystals in each pixel, light can be allowed to pass though in varying amounts, correspondingly illuminating the pixel. 1936: The Marconi Wireless Telegraph company patents the first practical application of the technology, "The Liquid Crystal Light valve".
* LCDs have longer response time than their plasma and CRT counterparts, creating ghosting and mixing when images rapidly change; this caveat however is continually improving as the technology progresses. LCDs can be either transmissive or reflective, depending on the location of the light source. A transmissive LCD is illuminated from the back by a backlight and viewed from the opposite side (front). This type of LCD is used in applications requiring high luminance levels such as computer displays, televisions, personal digital assistants, and mobile phones. The illumination device used to illuminate the LCD in such a product usually consumes much more power than the LCD itself. IPS has since been superseded by S-IPS (Super-IPS), which has all the benefits of IPS technology with the addition of improved pixel refresh timing. Though color reproduction approaches that of CRTs, the contrast ratio remains relatively weak. S-IPS technology only appears in larger displays aimed at professionals, though pricing has come down to the reach of the typical consumer. Enlarge
Menu:
We are laptop repair specialists!
We have qualified, A+ Certified Technicians ready to diagnose your laptop!
Whether you need a new part, or simply do not know why your laptop is acting up, feel free to give our technicians a call to give you an estimate. MORE
Our A+ Certified Technician will diagnose your laptop completely, and inform you of the problem. Estimated parts and labor to fix it will be given upon completion of testing... MORE
Reflective LCDs, often found in digital watches and calculators, are illuminated by external light reflected by a (sometimes) diffusing reflector behind the display. This type of LCD can produce darker 'blacks' than the transmissive type since light must pass through the liquid crystal layer twice and thus is attenuated twice, however because the reflected light is also attenuated twice in the translucent parts of the display image contrast is usually poorer than a transmissive display. The absence of a lamp significantly reduces power consumption, allowing for longer battery life in battery-powered devices; small reflective LCDs consume so little power that they can rely on a photovoltaic cell, as often found in pocket calculators. Small monochrome displays such as those found in personal organizers, or older laptop screens have a passive-matrix structure employing supertwist nematic (STN) or double-layer STN (DSTN) technology (DSTN corrects a color-shifting problem with STN). Each row or column of the display has a single electrical circuit. The pixels are addressed one at a time by row and column addresses. This type of display is called a passive matrix because the pixel must retain its state between refreshes without the benefit of a steady electrical charge. As the number of pixels (and, correspondingly, columns and rows) increases, this type of display becomes increasingly less feasible. Very slow response times and poor contrast are typical of passive-matrix LCDs. Twisted Nematic (TN)
PVA LCD panels are more likely to have defects than most ICs due to their larger size. In this example, a 12" SVGA LCD has 8 defects and a 6" wafer has only 3 defects. However, 134 of the 137 dies on the wafer will be acceptable, whereas rejection of the LCD panel would be a 0% yield. The standard is much higher now due to fierce competition between manufacturers and improved quality control. An SVGA LCD panel with 4 defective pixels is usually considered defective and customers can request an exchange for a new one. The location of defective pixels is also important. A display with only a few defective pixels may be unacceptable if the defective pixels are near each other. Manufacturers may also relax their replacement criteria when defective pixels are in the center of the viewing area. The TN display suffers from limited viewing angles, especially in the vertical direction, and some are unable to display the full 16.7 million colors (24-bit truecolor) available from modern graphics cards. These particular panels, with 6 bits per color channel as opposed to 8, can approach true 24-bit color using a dither method which quickly cycles pixels to simulate a given shade, which are noticeable to some and discomforting to others. Overall, color reproduction and linearity on TN panels is poor. Shortcomings in display color gamut (often referred to as a percentage of the NTSC color gamut) can also be attributed to backlighting technology. It is not uncommon for displays with CCFL (Cold Cathode Fluorescent Lamps) based lighting to range from 40% to 76% of the NTSC color gamut, whereas displays utilizing white LED backlights may extend past 100% of the NTSC color gamut -a difference quite perceivable by the human eye. TN+Film In color LCDs each individual pixel is divided into three cells, or subpixels, which are colored red, green, and blue, respectively, by additional filters. Each subpixel can be controlled independently to yield thousands or millions of possible colors for each pixel. Older CRT monitors employ a similar method for displaying color. Color components may be arrayed in various pixel geometries, depending on the monitor's usage.